Bullet Sensors & Transducers e-Digest, Vol. 190, Issue 7, July 2015: Products News

    (ISSN 1726-5479)

 

 

Editorial Calendar

Editorial Board

Submit an Article

Submit a White Paper

Submit Press Release

Best Selling Articles 2012

Top 25 Downloaded Article

10 Top Sensors Products of 2012

Best_Articles_2011

Journal Subscription

E+E Elektronik logo

 

 

Submit Press Release

 

or / and

 

White Paper

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents

2007 S&T e-Digest Contents

2008 S&T e-Digest Contents

2009 S&T e-Digest Contents

2010 S&T e-Digest Contents

2011 S&T e-Digest Contents


 

 

Room Transmitter for CO2, Humidity and Temperature

 

 

(Engerwitzdorf, 13.08.2015) The EE800 transmitter from E+E Elektronik measures CO2, temperature and relative humidity and calculates the dew point temperature. The versions with Modbus RTU or BACnet MS/TP interface also calculate absolute humidity, mixing ratio, specific enthalpy, frost point temperature and partial water vapour pressure. In addition, they can be easily integrated into a bus system for building automation or automatic indoor climate control.

 

The CO2 infrared measuring principle (dual wavelength NDIR*) used on the EE800 is characterized by high resistance to contamination. The auto-calibration compensates for ageing effects, which leads to exceptional long-term stability. A multi-point CO2 and temperature factory adjustment ensures excellent CO2 measurement accuracy across the entire temperature working range

 

The EE800 versions with analogue output (current or voltage) also feature also an optional passive temperature output.

 

The innovative snap-on design allows for fast mounting and minimizes installation costs. In order to meet various international standards the EE800 is available in two enclosure sizes. The measured or calculated values can be read on the optional display. An optional USB configuration adapter facilitates easy setup and adjustment of the EE800.

 

* non-dispersive infrared technology

 

 

About E+E Elektronik:

 

E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Dataloggers, hand-held transmitters and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC building technology, industrial measurement technology and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik manages a worldwide sales network and has representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (ÖKD) has been commissioned by the Austrian Federal Office for Metrology (BEV)) to provide the national standards for humidity and air velocity.

 

Contact:

 

Mr. Johannes Fraundorfer,

E+E Elektronik GmbH,
Langwiesen 7 A-4209

Engerwitzdorf Austria,

Tel.: +43 (0) 7235 605-0

Fax: +43 (0) 7235 605-8

E-mail: johannes.fraundorfer@epluse.at

Web: http://www.epluse.com

 

EE800 transmitter

 

 

 

 

 

Book 'Displacement Measurement'

 

 

Back to S&T e-Digest page

 


1999 - 2015 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.