Bullet Sensors & Transducers e-Digest, Vol. 50, Issue 12,  December 2004: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

PCB logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents


 

Slurry Pulsation Pressure Sensors

 

 

Depew, NY - High-sensitivity piezoelectric ICP pressure sensors from the Pressure Division of PCB Piezotronics, Inc., measure fast pressure transients, surges, spikes, and pulsations in paper slurry delivery systems. Models 106C10 and 106C20 ICP dynamic pressure sensors are used for detecting and monitoring dynamic pressure pulsations of paper slurry in headbox and piping systems, and for troubleshooting root causes of slurry flow irregularities.

 

The units generate a low-noise, 300 mV/psi (43.5 mV/kPa) output signal, are installed through check valves, and adjust for flush-mounting within the slurry flow.  Because the sensors are AC-coupled devices, any ambient, static background pressure or very slow pressure changes are ignored, permitting the units to monitor low-level dynamic pressures while being subjected to high static background pressure levels.

 

For additional information, contact the Pressure Division of PCB Piezotronics, Inc. toll-free at 888-684-0011 (in the U.S. and Canada) or 716-684-0001; fax 716-686-9129; e-mail: pressure@pcb.com, or visit PCB's web site at www.pcb.com.

 

 

 

 

Technical:

 

Dan Cummiske, 

Division Manager

Pressure Division

3425 Walden Avenue

Depew, NY  14043-2495 USA

Tel.: (888) 684-0011 ext. 2613

Fax: (716) 686-9129

E-mail: dcummiskey@pcb.com

Pressure Sensors 106C10, 106C20

   

Click picture to see full screen photo

 

 

General / Sales Leads:

 

Andrea Mohn, Marketing Coordinator

PCB Piezotronics, Inc.

3425 Walden Avenue

Depew, NY 14043-2495 USA

Tel.: (800) 828-8840 ext. 2216, fax: (716) 684-0987

E-mail: mktg@pcb.com

 

 

Back to S&T e-Digest page

 


1999 - 2004 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.