Bullet Sensors & Transducers e-Digest, Vol. 99, Issue 12, December 2008: Product News

    (ISSN 1726-5479)

 

Editorial Calendar 2009

Editorial Board

Submit an Article or Press Release

10 Top Sensors Products of 2007

Sensors & Transducers Journal 2007

Journal Subscription

Kavlico logo

 

 

Submit Press Release

Top 25 Downloaded Article

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents


 

 

Sealed Industrial Pressure Sensors for Harsh Environment Applications

 

 

Kavlico has launched a line of sealed industrial pressure sensors that incorporate a stainless steel diaphragm in an all welded 304L stainless steel housing making them well-suited for hostile environment applications. The sensors utilize Kavlico’s oil-filled piezo-resistive (PRT) sensing technology along with a state-of-the-art ASIC. Rugged by design, the sensors are capable of operating with a wide array of fluids and gases that are compatible with stainless steel.

 

Pressure ranges are available from 0-100 through 0-5,000 PSI absolute or sealed gage for the models P251/P251R and 0-6 through 0-400 Bar for the models P250/P250R.  The P250/P251 operate on a 5 Vdc power supply and provide a ratiometric 0.5 to 4.5 Vdc linear amplified output proportional to pressure while the P250R/P251R have an internal regulator and operate on 9 to 32 Vdc while providing a regulated 5 Vdc or 10 Vdc linear amplified output proportional to pressure.

 

Each sensor is temperature compensated and exhibit excellent EMI/RFI rejection capability. The high reliability sensors have an over-pressure capability of 2X FSO (Full Scale Output) and have been designed to operate in situations with large over-pressure spikes.

 

Typical industrial applications include refrigerant control and recovery, pumps and compressors, process control, water management, autoclaves, hydraulic systems, and test and monitoring equipment.

 

A wide variety of 12 standard electrical and 10 standard process connection options allow the sensors to be configured to meet each end-users application-specific requirement.

 

 

Contact:

 

Lori Appel

Kavlico

14501 Princeton Avenue

Moorpark, CA 93021

Tel.: (805) 552-3406

Fax: (805) 523-7125

E-mail: lappel@kavlico.com

Industrial pressure sensors P250/252

 

 

 

 

Read more about pressure sensors

 

 

Back to S&T e-Digest page

 


1999 - 2008 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.