Bullet Sensors & Transducers e-Digest, Vol. 39, Issue 1,  January 2004: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

PCB Piezotronics logo

2000-2002 S&T e-Digest Contents


 

 

Underwater ICP Blast Pressure Sensors

 

Depew, NY - Series 138 ICP® Underwater Blast Sensors from the Pressure Division of PCB Piezotronics, Inc., provide clean, non-resonant, high-frequency output through long cables in adverse underwater environments. Structured with a volumetrically-sensitive tourmaline crystal suspended and sealed in an insulating, oil-filled vinyl tube, these sensors are designed specifically for measuring shock wave pressures associated with underwater explosion testing. Integral microelectronics provide a low impedance voltage output that can be transmitted through cables sealed directly to the sensor. Five standard ranges are available form 1,000 to 50,000 psi.

 

For additional information, contact the Pressure Division of PCB Piezotronics, Inc. at 888-684-0011 (toll free in the U.S. and Canada) or 716-684-0001; fax 716-686-9129; email: pressure@pcb.com, or visit PCB's web site at http://www.pcb.com

Underwater Pressure Sensors Serise 138

 

Click picture to see full screen photo

General/ Sales Leads:

Andrea Mohn, Marketing Assistant

PCB Piezotronics, Inc.

3425 Walden Avenue, Depew, NY 14043-2495

Phone: (800)828-8840

Fax: (716)684-0987

E-mail: amohn@pcb.com

Technical:

Dan Cummiskey, Division Manager
Pressure Division
3425 Walden Avenue
Depew, NY 14043-2495
Phone: (888)684-0011, fax: (716)686-9129
E-Mail: dcummiskey@pcb.com

 

 

Back to S&T e-Digest page

 


1999 - 2004 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.