Bullet Sensors & Transducers e-Digest, Vol. 63, Issue 1, January 2006: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

PCB logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents


 

 

MEMS High Sensitivity DC Response Accelerometers for Crash Sled and Aerospace Testing

 

January 10, 2006, Depew, NY, USA - The Vibration Division of PCB Piezotronics, Inc. (PCB) introduces Series 3741 New High Sensitivity MEMS DC Accelerometers. Series 3741 offers several models to accommodate various crash sled acceleration profiles, and full scale ranges from 2 to 200 g, up to 2k Hz measurement capability, and sensitivities up to 1 V/g, to accommodate both automotive and aerospace applications.

 

The Series' rugged, low-profile design allows for mounting on restricted areas of crash simulation sleds, truck axles and aircraft wing surfaces. Their DC response allows for measurements in both static and dynamic environments. Accelerometers include mechanical over range stops, to prevent damage due to rough handling and transient shock environments. Internal amplification provides high-level signal (2 V FSO) at low acceleration levels, for low amplitude motion measurements on automotive and aerospace structures. Sensors are also gas damped, and are temperature compensated for stable measurements in varying environments.

 

This series has been specially designed in response to more stringent automotive safety testing standards, and accompanying occupant safety system requirements, including side-impact protection, child restraints/seat testing, pedestrian protection, wheelchair integral restraint systems (WIRS), SAE J2249, and rear impact/whiplash. In addition, a variety of model choices allows for applications including motion studies, tilt measurements, ground vibration / flight testing of aircraft and rail car motion measurements

 

For additional information, contact the Vibration Division of PCB Piezotronics, Inc. toll-free at 888-684-0013 (in the U.S. and Canada); E-mail: vibration@pcb.com; or fax at 716-685-3886. For other PCB products, contact PCB directly at 716-684-0001, or visit our web site at www.pcb.com.

 

 

Technical:

 

James Mathews, Product Manager,

PCB Vibration Division,

3425 Walden Avenue

Depew, NY 14043-2495 USA

E-mail: jmathews@pcb.com

 

Series 3741 accelerometer applications

   

 

General / Sales Leads:

 

Andrea Mohn, Marketing Coordinator

PCB Piezotronics, Inc.

3425 Walden Avenue

Depew, NY 14043-2495 USA

Tel.: (716) 684-0002 ext. 2216, fax: (716) 684-0987

E-mail: mktg@pcb.com

 

 

Back to S&T e-Digest page

 


1999 - 2006 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.