Bullet Sensors & Transducers e-Digest, Vol. 45, Issue 7,  July 2004: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

PCB Piezotronics logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents


 

High Sensitivity Acoustic Pressure Sensors

 

 

July 13, 2004, Depew, NY New Series 103B ICP Acoustic Pressure Sensors from the Pressure Division of PCB Piezotronics, Inc. measure pulsating, transient, and turbulent acoustic phenomena on transportation vehicles and other structures. Low profile, high-sensitivity sensors are ideal for applications such as automotive and aerospace wind tunnel testing, aerodynamic testing and analysis, aircraft cabin and cockpit noise testing, and acoustic fatigue testing on airframes.

 

ICP style sensors feature built-in signal conditioning microelectronics to produce clean, low-impedance voltage output signals, and are offered in three configurations; pigtail wire solder connection, 10-32 top connector, and 3-56 side connector. Each configuration is available in sensitivities of 500 or 1,500 mV/psi (72.5 or 217.5 mV/kPa) and ranges of 10 or 3.33 psi (68.95 or 22.96 kPa) respectively. Rise time is less than 25 us, and the discharge time constant allows the sensors to follow transient events up to several hundred milliseconds in duration.

 

For additional information, contact the Pressure Division of PCB Piezotronics, Inc. toll-free at 888-684-0011 (in the U.S. and Canada) or 716-684-0001; fax 716-686-9129; email: pressure@pcb.com, or visit PCBs web site at www.pcb.com

 

 

Technical:

 

Dan Cummiskey, 

Division Manager,

PCB Piezotronics, Inc.

3425 Walden Avenue

Depew, NY 14043-2495 USA

Phone (716) 684-0002 ext. 2613

Fax: (716) 686-9129

E-mail: dcummiskey@pcb.com

Acoustic Pressure Sensors 103B

Click picture to see full screen photo

 

 

 

 

 

 

Back to S&T e-Digest page

 


1999 - 2004 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.