Bullet Sensors & Transducers e-Digest, Vol. 45, Issue 7,  July 2004: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

PCB Piezotronics logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents


 

Piezoresistive Crash Test Accelerometer

 

 

July 13, 2004, Depew, NY The Vibration Division of PCB Piezotronics, Inc. introduces Model 3901F3HB2000G, a lightweight, piezoresistive accelerometer that is ideally suited for automotive crash test instrumentation. Maximum range is 2000 g with a frequency range up to 5000 Hz ( 5%). Featuring an aluminum housing and integral cable, this 2.0 gm sensor minimizes mass loading and can fit into vehicle recesses, such as frame members, floor pan, and engine compartment, where crash data is required. Use this sensor for acceleration data in front, side, and rear crash testing.

 

For additional information on this accelerometer, contact the Vibration Division of PCB Piezotronics, Inc. toll-free at 888-684-0013 (in the U.S. and Canada); E-mail: vibration@pcb.com; or fax at 716-685-3886.  For other PCB products, contact PCB directly at 716-684-0001, or visit our web site at www.pcb.com

 

 

Technical:

 

Bill Coffta,

Inside Sales Manager,

Vibration Division, 3425 Walden Avenue

Depew, NY 14043-2495

Tel: (888) 684-0013 ext. 2247 

Fax: (716) 685-3886

E-mail: bcoffta@pcb.com

Piezoresistive Crash Test Accelerometer

Click picture to see full screen photo

 

 

 

 

 

 

Back to S&T e-Digest page

 


1999 - 2004 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.