Bullet Sensors & Transducers e-Digest, Vol. 65, Issue 3, March 2006: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

PCB logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents


 

 

Triaxial Force Sensors Measure Vehicle Chassis Dynamics

 

 

Depew, NY, USA - The 260A Series Triaxial Force Sensors from the Force/Torque Division of PCB Piezotronics, Inc. (PCB) simultaneously measure dynamic and quasi-static forces in three orthogonal directions (X, Y, and Z-axes). The sensors are used to study vehicle chassis dynamics at interfaces between shock absorbers, struts or other chassis components.

 

Triaxial force sensor measurements supplement vibration measurements in automobile chassis research by providing the input force that drives the dynamic response from the chassis to the vehicle. The 260A series features full-scale measuring ranges from 500 lb to 4,000 lb (2.2 kN to 18 kN) in the X and Y directions and from 1,000 lb to 10,000 lb (4.5 kN to 45 kN) in the Z direction. Single axis models are also available.

 

For additional information, contact the Force/Torque Division of PCB Piezotronics, Inc. toll-free at 888-684-0004 (in the U.S. and Canada) or 716-684-0001; e-mail: force@pcb.com; fax 716-684-8877; or visit PCB's web site at www.pcb.com.

 

 

Technical:

 

Peter Munschauer,

Division Manager,

Force/Torque Division, 3425 Walden Avenue,

Depew, NY 14043-2495 USA,

Tel.: (888) 684-0004 ext. 2405, fax: (716) 684-8877

E-mail: pmunschauer@pcb.com

 

Triaxial Force Sensors 260A series

   

 

General / Sales Leads:

 

Andrea Mohn, Marketing Coordinator

PCB Piezotronics, Inc.

3425 Walden Avenue

Depew, NY 14043-2495 USA

Tel.: (716) 684-0002 ext. 2216, fax: (716) 684-0987

E-mail: mktg@pcb.com

 

 

 

Back to S&T e-Digest page

 


1999 - 2006 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.