Bullet Sensors & Transducers e-Digest, Vol. 114, Issue 3, March 2010: Product News

    (ISSN 1726-5479)

 

Editorial Calendar 2010

Editorial Board

Submit an Article or Press Release

10 Top Sensors Products of 2009

Sensors & Transducers Journal 2009

Journal Subscription

SensorTechnics logo

 

Submit Press Release

Top 25 Downloaded Article

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents


 

 

High Accuracy HDI Pressure Sensors Offer 3 V Supply Versions for Battery Powered Applications

 

Sensortechnics’ HDI sensors measure absolute, differential or gage pressures in various ranges from 10 mbar up to 5 bar. The HDI series features 3 V supply versions which are ideally suitable for battery powered applications, e.g. in portable or handheld devices. HDI pressure sensors perform precision digital signal conditioning and achieve ultra high accuracies with an excellent Total Error Band (TEB) better than ±0.5 % FSS over a temperature range of 0…+85 °C.

 

The HDI series provides digital interfaces with I²C bus protocol and analog 0.5 … 4.5 V output signals at the same time therefore allowing customers to build up a redundancy functionality for safety critical applications. The sensors are intended to be used with air and non-corrosive gases and offer various unidirectional, bidirectional or barometric calibrations as well as different accuracy classes. Miniature SMT and DIP housings allow for space-saving PCB-mounting and maximum OEM design flexibility A wide selection of sensor configurations are available from stock at Sensortechnics. All HDI pressure sensors can be modified according to customer specific requirements, e.g. with respect to pressure range, resolution, accuracy and internal digital settings.

 

Important features of the HDI series are:

  • 3 V and 5 V supply versions available from stock;

  • Total Error Band (TEB) ±0.5 %FSS from 0…+85 °C;

  • I²C bus interface and analog output signal at the same time;

  • Miniature SMT and DIP housings.

Due to the wide selection of different sensor configurations Sensortechnics is able to offer customers the best suitable sensor with an ideal cost/performance ratio Typical applications of the HDI pressure sensors include medical devices, instrumentation, environmental controls and HVAC.

 

 

Contact:

 

Andrea Doster

Sensortechnics GmbH

Boschstr., 10, 82178 Puchheim, Germany

Tel.: +49 (0)89 80083-0, fax: +49 (0)89 80083-33

E-mail: info@sensortechnics.com

Http://www.sensortechnics.com

HDI Pressure Sensors

Pressure sensors

 

 

 

 

 

Read more about Pressure Sensors

 

 

 

Back to S&T e-Digest page

 


1999 - 2010 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.