Bullet Sensors & Transducers e-Digest, Vol. 116, Issue 5, May 2010: Product News

    (ISSN 1726-5479)

 

Editorial Calendar 2010

Editorial Board

Submit an Article or Press Release

10 Top Sensors Products of 2009

Sensors & Transducers Journal 2009

Journal Subscription

IMI Sensors logo

 

Submit Press Release

Top 25 Downloaded Article

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents


 

 

ICP® In-Line Vibration Transmitter

 

Depew, New York, USA – May 10, 2010 – IMI Sensors – a division of PCB Piezotronics, Inc. announces the release of their model 682A09 ICP® In-Line 4-20 mA Vibration Transmitter.

 

Another IMI Sensors industry-first, the model 682A09 installs in line with any industrial accelerometer and converts the vibration signal to a 4-20 mA velocity output that can be trended with today’s PLC, DCS or SCADA control room systems. Its sleek design installs right into the cable run, no DIN rails, cabinets or special power required. Now customers can take their existing accelerometers and turn them into 24/7 vibration monitoring devices for their most critical machinery.

 

The 682A09 is a stainless steel, hermetically sealed design capable of operating in the harshest environments with 2-pin MIL connector input and 3-pin MIL connector output. It accepts a 100 mV/g analog signal, converts to 4-20 mA output and operates off of loop-power supplied by the PLC, DCS or SCADA system. In addition, the 682A09 outputs the 100 mV/g analog signal via its 3-pin output connector. The analog signal can be run to a central collection point, allowing the user to maintain the FFT capability of the original system.

 

IMI Sensors is dedicated to addressing the machinery vibration sensing needs for condition monitoring, predictive maintenance, and process control requirements. All IMI sensors and vibration switches are designed to withstand the rigors of harsh industrial environments. Included are sensors that interface directly with vibration data collectors and analysis equipment, as well as process monitoring equipment, PLC, DCS, alarm, and SCADA systems.

 

 

 

 

 

 

 

 

Contact:

 

Jennifer Beal

Marketing Coordinator

PCB Piezotronics, Inc.,

40000 Grand River Avenue, Suite 201

Novi, MI 48375, USA

Tel.: 716-684-0001

E-mail: prospects@pcb.com

Model 682A09 ICP® In-Line Vibration Transmitter

 

 

 

Read more about Mechanical Sensors

 

 

 

Back to S&T e-Digest page

 


1999 - 2010 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.