Bullet Sensors & Transducers e-Digest, Vol. 73, Issue 11, November 2006: Product News

    (ISSN 1726- 5479)

 

Top 25 Downloaded Article

Editorial Calendar 2007

Editorial Calendar 2006

Editorial Board

Submit an Article or Press Release

iC Haus logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents


 

 

Monolithically Integrated 256-pixel

CMOS Line Sensor

 

 

The 256x1 CMOS line sensor iC-LFL1402 is functionally compatible with the 1402 standard (serial mode) and operates with a pixel clock pulse of up to 5 MHz. Thanks to monolithic integration the 200 μm pixels are arranged in a 63.5 μm grid (400 DPI) without gaps or distortion and are thus ideal for use in spectroscopy applications, for example. The integrated control logic needs only a start and clock signal to generate the light/voltage conversion at the analog output.

 

The range of possible applications is considerably extended by the inclusion of an electronic shutter. This permits the length of integration to be varied externally.

 

The analog output push-pull output enables a high readout clock rate and a wide signal dynamic range. Should the 5 MHz clock rate not be required, the power consumption of the IC can be reduced by an external bias current setting.

 

The device has a supply voltage of 5 V. In the optoBGA package there is an operating temperature range of -25 to +100 C.

 

 

 

Contact:

 

Uwe Malzahn

iC-Haus GmbH, Am Kuemmerling 18,

D-55294 Bodenheim, Germany

Tel: +49 - (0)6135 - 9292-300 

Fax: +49 - (0)6135 - 9292-192

E-mail: sales@ichaus.com

Line Sensor

   

 

 

Back to S&T e-Digest page

 


1999 - 2006 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.