Bullet Sensors & Transducers e-Digest, Vol. 121, Issue 10, October 2010: Product News

    (ISSN 1726-5479)

 

Editorial Calendar 2010

Editorial Board

Submit an Article or Press Release

10 Top Sensors Products of 2009

Sensors & Transducers Journal 2009

Journal Subscription

E+E Elektronik

 

Submit Press Release

Top 25 Downloaded Article

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents


 

 

New Flow Meter for Compressed Air and Gases

 

 

Only by knowing your exact compressed air and process gas costs will you be able to unearth significant savings potentials. Irrespective of pressure and temperature, the EE771 flow meter from E+E Elektronik measures mass flow or volumetric flow in your supply system with the greatest accuracy. The flow meter can be used effectively to measure the consumption of compressed air, nitrogen, helium, argon, oxygen or other non-corrosive gases.

 

The design of the new EE771 flow meter is based on the direct thermal mass flow measuring principle. At its heart is an E+E hot-film sensor element proven over several million installations in the automotive industry.

 

The large 400:1 measuring range ensures precise evaluation throughout the supply system. Even the smallest volumetric flow rates are accurately recorded an essential prerequisite whether you are calculating usage fees or finding leaks.

 

The unique mounting concept in combination with a ball valve permits rapid installation and removal of the device that remains operational at all times. That the measuring head can be exchanged in seconds without disconnecting the measuring line is another useful feature for periodic recalibration.

The integrated USB interface allows the customer to easily adapt the flow meter to specific measuring tasks.

 

Two outputs are available. They can be configured either as analogue outputs (current or voltage), switching outputs or pulse outputs for measuring consumption. The flowmeter requires 18-30VAC/DC power.

 

 

 

 

 

 

Contact:

 

E+E Elektronik GmbH

Martin Raab

Langwiesen 7

A-4209 Engerwitzdorf, Austria

Tel.: +43 -7235-605-0

Fax: +43 -7235-605-8

E-mail: martin.raab@epluse.at

http://www.epluse.com

 

 

 

 

EE771 flow meter

 

 

 

Read more about Flow Sensors

 

 

 

Back to S&T e-Digest page

 


1999 - 2010 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.