AKCP Airflow Sensor AFS01

Airflow Sensors AFS01

Airflow sensor AFS01

Price: US $ 145.00 Airflow sensor AFS01

Shipping Policy

Sipping Charges

US Shipments

Shipping cost for a sensorProbe is $ 20.00

Every additional sensorProbe is $ 10.00

Every additional sensor is $ 5.00

The DC adapter is included for free

AKCP pays all taxes and customs duties

Non US Shipments

For EU Countries

The sensorProbe uses an external country specific DC adapter

There is an additional $10 charge for this adapter

The customer pays all taxes

There is an additional charge of $10 for all shipments of the sensorProbe to help offset the high costs of regulatory approvals

Product Description

The AKCP airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System reliability and safety could be jeopardized if this cooling airflow stops.

The Airflow sensor is placed in the path of the air stream, where the user can monitor the status and the amount of the flowing air. The sensorProbe displays this information using a graphical display via its web interface. In addition to an on/off indication, it also graphs the analog values over a period of time. If, for example, the fan slows down the user will be give an indication of change over time. This may happen if the fan close to failure or the air filter is clogged.

In addition to a web interface an SNMP interface is provided for alarm/normal status and to get the current analog value. SNMP traps sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.

Features

On/off alarm signal of airflow
Airflow data graphically displayed of over time
Accurate, cost effective flow sensing
Operates from a single +5 V DC Power Supply which powered by the sensorProbe
2 LEDs indicate the status of Airflow and that the sensor is securely plugged into the sensorProbe
Electronics mounted in a small plastic case
Sensor type - open/closed contact switch
Power source: powered by the sensorProbe. No additional power needed
sensorProbe autodetects the presence of the airflow sensor
Up to 2 airflow sensors per sensorProbe2A, up to 8 on the sensorProbe8
Full autosense including disconnect alarm

Specifications

Data graphically displayed via a web page
Data collection: via network management
Ambient range: -20°C to 85° C
Measurement rate: one reading each second, data logging once per minute
Communication cable: RJ45 jack to sensorProbe
Sensor type: Thermistor
Sensor power: line power from sensorProbe
Trap information: Warning sensor number, Sensor description, Airflow (%)