e-Shop (6 from 21)

1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- 16- 17- 18- 19- 20- 21

On-line Catalog

Price List (40K)

SensorProbe 2A

Simple, Accurate and Rugged sensorProbe is a low cost SNMP enabled and Web based Environmental Monitoring Device. Simply assign the IP address and connect to the embedded web server. Comes complete with temperature sensor. Can notify you by e-mail, SMS or SNMP Alerts in your Network Management system.

SensorArray Pro

sensorArray Pro, is a larger version of sensorProbe with 8 ports and an additional expander card. The expander card can accommodate up to 32 dry contact inputs to the sensorArray. It is a simple SNMP based hardware device designed to monitor and notify changes in the environment variation for enterprise class network.

SensorProbe 8

SP8 is a high speed, accurate and intelligent monitoring device. The SP8 is a completely embedded host with a proprietary Linux like Operating System, including TCP/IP stack, Web server, email, SMS and full SNMP functionality. For special projects we even have an optional high speed TI DSP and 16 bit A/D converter.

SensorProbe 8-X20

The sensorProbe8-X20 is the next generation dry contact device from AKCP. The SP8-X20 is based on AKCP’s sensorProbe™ technology with an advanced 20 dry contact inputs. It comes in a 1 U rackmount box. The SP8-X20 gives you complete of your enterprise infrastructure security. Comes with 8 full autoSense RJ45 ports.

SensorProbe 8-X60

The sensorProbe8-X60 is the next generation dry contact device from AKCP. The SP8-X60 is based on AKCP’s sensorProbe™ technology with an advanced 60 dry contact inputs. It comes in a 1 U rackmount box. The SP8-X60 gives you complete of your enterprise infrastructure security. Comes with 8 full autoSense RJ45 ports.

Airflow Sensor

The AKCP airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. It cab be placed in the path of the air stream, where the user can monitor the status and the amount of the flowing air. The sensorProbe displays this information via its web interface.

4-20 mA I-to-V Converter

The 4-20 mA signal converter is used to integrate the sensorProbe with a 4-20 mA transmitter. 4-20 mA transmitters are common in the industry for use with high quality sensors. With the 4-20 mA converter these sensors can be integrated into the sensorProbe enhancing their value with the addition of web interface, email interface, etc.

Motion Detector

The AKCP ‘Motion Detector’ is a revolutionary safety device that functions as an intruder detector. Designed to detect human body movement in a protected area, this motion detector has a wide detection angle of 120 degree - more than that of any existing detector. The time delay of the device is adjustable between 20 seconds and seven minutes.

Temperature Sensor

Up to two temperature sensors can be plugged into RJ-45 jacks on the sensorProbe. Measurement range -55°C to +125°C and -67°F to +257°F  accuracy ±0.5°C and ±0.9°F Sensor type: semiconductor microprocessor controlled. powered by the sensorProbe. No additional power needed.

Humidity Sensor

Up to two humidity sensors can be plugged into RJ-45 jacks on the sensorProbe. Measurement range 0 to 100% relative humidity (RH); accuracy at 20°C ±3%, elsewhere ±5%; working range -20°C +60°C. Sensor type: capacitive semiconductor. Measurement rate: one reading every second.

Water Sensor

The water detector is an advanced microprocessor based design capable of detecting distilled water. Measurement range - Wet or Dry (- 20 °C + 60 °C). Sensor is based on the patent pending, microprocessor controlled, advanced capacitance measurement technology.

Security Sensor

Security sensor with an ALARM/NORMAL indication in software. Security sensors can detect doors, windows status. SNMP interface for alarm/ normal status. Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP.

Voltage Monitor Sensor

Voltage Monitor sensor with an ALARM/NORMAL indication in software. Can have up to two voltage sensors per sensorProbe. Voltage sensors can detect the presence or the absence of line voltage. Designed for use worldwide. SNMP interface for alarm/ normal status. Measurement range  50 - 250 V. LED indicator on sensor.

DC Voltage Sensor

The DC Voltage Sensor allows the user to integrate a custom sensor to the sensorProbe while still retaining all of the features of the standard sensors. The DC Voltage sensor has the full range of functionality including snmp integration, email and trap generation upon settable limits and thresholds. Accuracy - ±2LSB. Conversion time - 280 us.

Smoke Detector

AKCP sensorProbes can now be integrated with Multipoint smoke detectors. These are easy to install and configure, and provide selectable multi-mode detection to suit the environment in which they are installed. The mode of detection can be changed by configuring a DIL switch in the detector electronics module.

CameraProbe 8

Network IP based Physical Security and Environmental Monitoring Device with Remote Sensing Management capabilities. Sensor alerts triggers network camera to automatically take pictures. Capture Network space and equipment - environmental related problems with high resolutions pictures and sends it out as an email attachment.