Demonstration and characterization of PZT thin-film sensors and actuators for
meso- and micro-structures
Pages 369-377
Yi-Chu Hsu, Chia-Che Wu, Cheng-Chun Lee, G. Z. Cao and I. Y. Shen
Abstract
|
A z-axis differential capacitive SOI accelerometer with vertical comb electrodes
Pages 378-383
Toshiyuki Tsuchiya and Hirofumi Funabashi
Abstract
|
A global calibration method for large-scale multi-sensor visual measurement systems
Pages 384-393
R. S. Lu and Y. F. Li
Abstract
|
Multi-wall carbon nanotube as a new infrared detected material
Pages 394-397
Liyue Liu and Yafei Zhang
Abstract
|
Optical sensors for evaluating environmental acidity in the preventive conservation of historical objects
Pages 398-404
N. Carmona, M. A. Villegas and J. M. Fernández Navarro
Abstract
|
Suppression of magnetic noise in the fundamental-mode orthogonal fluxgate
Pages 405-409
Eugene Paperno
Abstract
|
Planar coils with magnetic layers for optimized energy transfer in telemetric systems
Pages 410-416
Timm Leuerer and Wilfried Mokwa
Abstract
|
Microsensor for impact of molten metal microdrops
Pages 417-423
H. -Y. Kim, T. Karahalios, T. Qiu and J. -H. Chun
Abstract
|
An analytical model of constrained piezoelectric thin film sensors
Pages 424-437
R. Ali, D. Roy Mahapatra and S. Gopalakrishnan
Abstract
|
Temperature-dependent electrical conductivity in thermally carbonized porous silicon
Pages 438-441
J. Salonen, M. Björkqvist and J. Paski
Abstract
|
Residual stresses in a pressure-sensor package induced by adhesive material during curing: a case study
Pages 442-449
Marina Santo Zarnik, Dubravka Rocak and Sreco Macek
Abstract
|
Fabrication and characterization of the multilayered PTCR ceramic thermistors by slip casting
Pages 450-454
Dongxiang Zhou, Yan Chen, Daoli Zhang, Huan Liu, Yunxiang Hu and Shuping Gong
Abstract
|
Structure and electrical properties of PMZN–PZT quaternary ceramics for piezoelectric transformers
Pages 455-460
Yu-Dong Hou, Man-Kang Zhu, Chang-Sheng Tian and Hui Yan
Abstract
|
Generation of electrical energy for portable devices: Comparative study of an electromagnetic and a piezoelectric system
Pages 461-471
G. Poulin, E. Sarraute and F. Costa
Abstract
|
Theoretical evaluation of the dispensing well plate method (DWP part II)
Pages 472-482
Peter Koltay, Jan Kalix and Roland Zengerle
Abstract
|
The dispensing well plate: a novel nanodispenser for the multiparallel delivery of liquids
(DWP Part I)
Pages 483-491
Peter Koltay, Reinhard Steger, Benjamin Bohl and Roland Zengerle
Abstract
|
Inter-phases mechanical coupling in ultrasonic motors
Pages 492-500
Lionel Petit and Paul Gonnard
Abstract
|
Modeling of on-membrane thermoelectric power supplies
Pages 501-508
A. Jacquot, G. Chen, H. Scherrer, A. Dauscher and B. Lenoir
Abstract
|
Effect of geometry on properties of multilayer structure actuator
Pages 509-518
Soon-Jong Jeong, Mun-Su Ha and Jae-Sung Song
Abstract
|
A thermopneumatic dispensing micropump
Pages 519-524
Christopher G. Cooney and Bruce C. Towe
Abstract
|
Analysis of a novel micro-hydraulic actuation for MEMS
Pages 525-529
Simon Mutzenich, Thurai Vinay and Gary Rosengarten
Abstract
|
Development and optimization of 3-D bridge-type hinge mechanisms
Pages 530-538
Jun Hyung Kim, Soo Hyun Kim and Yoon Keun Kwak
Abstract
|
An investigation of tool-wear monitoring in a high-speed machining process
Pages 539-545
Rodolfo E. Haber, Jose E. Jiménez, C. Ronei Peres and José R. Alique
Abstract
|
|
|
Journal : SENSORS AND ACTUATORS A: PHYSICAL