Monitoring changes in the refractive index of gases by means of a fiber optic
Fabry-Perot interferometer sensor
Pages 177-182
Gao Zhi Xiao, Audrey Adnet, Zhiyi Zhang, Feng Guo Sun and Chander P. Grover
Abstract
|
A high precision ultrasonic docking system used for automatic guided vehicle
Pages 183-189
F. Tong, S.K. Tso and T.Z. Xu
Abstract
|
Contact pressure measurement using silicon-based AlxGa1−xAs semiconductor pressure sensors
Pages 190-201
Thet Naing Tun, Toh Siew Lok, Tay Cho Jui, Ramam Akkipeddi and M. Rahman
Abstract
|
Design of planar capacitive type sensor for “water content” monitoring in a production line
Pages 202-211
E.D. Tsamis and J.N. Avaritsiotis
Abstract
|
A microfluidic experimental platform with internal pressure measurements
Pages 212-221
M.J. Kohl, S.I. Abdel-Khalik, S.M. Jeter and D.L. Sadowski
Abstract
|
Piezoresistance response of thin film manganin sensors
Pages 222-225
Teng Lin, Yang Bang Chao, Du Xiao Song and Zhou Hong Ren
Abstract
|
A micro corona motor
Pages 226-232
Sanghoon Lee, Daejong Kim, Michael D. Bryant and Frederick F. Ling
Abstract
|
Enhancement of the measurement range of FBG sensors in a WDM network: a self-organizing network solution
Pages 233-237
N. Zeng, C.Z. Shi, C.C. Chan, M. Zhang, X.Y. Dong, Y.B. Liao and S.R. Lai
Abstract
|
A device for measurements of the temperature response to single
discharges with high local resolution and fast response time
Pages 238-243
B. Revaz, R. Flükiger, J. Carron and M. Rappaz
Abstract
|
A simple analog behavioural model for NTC thermistors including selfheating effect
Pages 244-247
Ali Ümit Keskin
Abstract
|
A low-cost thermographic device for the detection of concealed groove in metal plate
Pages 248-253
Byoung Chul Kim, Young Han Kim and Jeong Seb Han
Abstract
|
Temperature-compensated high pressure FBG sensor with a bulk-modulus and self-demodulation method
Pages 254-258
Jian Yang, Yong Zhao, Bao-Jin Peng and Xu Wan
Abstract
|
Microfabrication and test of a three-dimensional polymer hydro-focusing unit for flow cytometry applications
Pages 259-267
Ren Yang, Daniel L. Feeback and Wanjun Wang
Abstract
|
Crack sensing with a multimode fiber: experimental and theoretical studies
Pages 268-277
Noah Olson, Christopher K.Y. Leung and Aidong Meng
Abstract
|
Experimental study of a vehicle detector with an AMR sensor
Pages 278-284
Moon Ho Kang, Byoung Wook Choi, Kyung Chul Koh, Jae Ho Lee and Gwi Tae Park
Abstract
|
Development of a novel high precision piezoelectric linear stepper actuator
Pages 285-291
Zhiyong Duan and Qingkang Wang
Abstract
|
A magnetic field-induced current-modulating opamp based on CMOS differential Tesla–Volt multiplier cell for MAGFET 1/f noise reduction
Pages 292-297
Z.Q. Li, X.W. Sun, S.C. Tan and C.M. Li
Abstract
|
A novel method to fabricate gapless hexagonal micro-lens array
Pages 298-306
M.-C. Chou, C.T. Pan, S.C. Shen, M.-F. Chen, K.L. Lin and S.-T. Wu
Abstract
|
Fabrication of hard magnetic microarrays by electroless codeposition for MEMS actuators
Pages 307-312
Shan Guan and Bradley J. Nelson
Abstract
|
Determination of stress profile and optimization of stress gradient in PECVD
poly-SiGe films
Pages 313-321
Antonio Molfese, Anshu Mehta and Ann Witvrouw
Abstract
|
Characterization of sub-stoichiometric tungsten trioxide (WO3−X) using impedance spectroscopy
Pages 322-331
M. Ramzan and R. Brydson
Abstract
|
Design of a giant magnetostrictive motor driven by elliptical motion
Pages 332-337
Zhitong Cao and Jiongjiong Cai
Abstract
|
The properties of demoulding of Ni and Ni-PTFE moulding inserts
Pages 338-341
Zhang Peng, Liu Gang, Tian Yangchao and Tian Xuehong
Abstract
|
Screen-printed piezoelectric ceramic thick films with sintering additives introduced through a liquid-phase approach
Pages 342-348
Kui Yao, Xujiang He, Yuan Xu and Meima Chen
Abstarct
|
|
|
Journal : SENSORS AND ACTUATORS A: PHYSICAL