Bullet  Journal: SENSORS AND ACTUATORS A: PHYSICAL

     ISSN: 0924-4247  Vol./Iss.: 121, 2

 

Date : 30-June-2005

 

Characterization of a FBG strain gage array embedded in composite structure
Pages 297-305
Yu Fan and Mojtaba Kahrizi
Abstract
Thermal response of an on-chip assembly of RTD heaters, sputtered sample and microthermocouples
Pages 306-320
Muhammad Imran and A. Bhattacharyya
Abstract
 
 Physical Section
Improvement of Lamb waves sensors: Temperature sensitivity compensation
Pages 321-326
H. Jia, R. Duhamel, J.-F. Manceau, M. de Labachelerie and F. Bastien
Abstract
Viscosity sensors for engine oil condition monitoring—Application and interpretation of results
Pages 327-332
A. Agoston, C. Ötsch and B. Jakoby
Abstract
Fiber-optics multiplexed interferometric current sensors
Pages 333-338
H. Lin and S.C. Huang
Abstract
A combined Q and heterodyne sensor incorporating real-time DSP for reinforcement imaging, corrosion detection and material characterisation
Pages 339-346
Graham Miller, Patrick Gaydecki, Sung Quek, Bosco Fernandes and Muhammad Zaid
Abstract
Sector split-drain magnetic field-effect transistor based on standard CMOS technology
Yao Yunruo, Zhu Dazhong and Guo Qing
Abstract
High-frequency current distribution in thin-film comb thermal converter
Pages 352-363
Alexander G. Kozlov
Abstract
Microsystems and microfluidic device for single oocyte transportation and trapping: Toward the automation of in vitro fertilising
Pages 364-372
Zouaoui Sadani, Bruno Wacogne, Christian Pieralli, Christophe Roux and Tijani Gharbi
Abstract
An approach to durable PVDF cantilevers with highly conducting PEDOT/PSS (DMSO) electrodes
Pages 373-381
C.S. Lee, J. Joo, S. Han and S.K. Koh
Abstract
Capacitive micromachined ultrasonic transducer with an open-cells structure
Pages 382-387
Giosuč Caliano, Alessandro Savoia, Alessandro Caronti, Vittorio Foglietti, Elena Cianci and Massimo Pappalardo
Abstract
Low cost PCB thermal sigma–delta air flowmeter with improved thermal isolation
Pages 388-394
M. Domínguez, J. Ricart, A. Moreno, X. Contestí and S. Garriga
Abstract
Effects of non-parallel combs on reliable operation conditions of capacitive inertial sensor for step and shock signals
Pages 395-404
Linxi Dong, Lufeng Che, Lingling Sun and Yuelin Wang
Abstract
Indium sesquitelluride (In2Te3) thin film strain gauge
Pages 405-409
R.R. Desai, D. Lakshminarayana, P.B. Patel and C.J. Panchal
Abstract
A scheme for improving the performance of a gyroscope-free inertial measurement unit
Pages 410-420
Sungsu Park, Chin-Woo Tan and Joohyuk Park
Abstract
Digitalization of highly precise fluxgate magnetometers
Pages 421-429
A. Cerman, A. Kuna, P. Ripka and J.M.G. Merayo
Abstract
Frequency-modulation-type MI sensor with nanocrystalline ribbon core
Pages 430-433
Z.M. Wu, Z.J. Zhao, J.X. Yang, L.P. Liu and X.L. Yang
Abstract
A study on the performance of bending mode piezoelectric accelerometers
Pages 434-442
A.T. Kollias and J.N. Avaritsiotis
Abstract
Evaluation of a novel PTC thermistor for telecom overcurrent protection
Pages 443-449
Chih-Kuo Liang and Chen-Che Tsai
Abstract
 
 Materials and Technology Section
Material nonlinear characteristics of the 3203HD PZT wafer under high electric fields
Pages 450-456
Sangki Lee, Sung-Hoon Jang, Young Sung Kim, Hoon Cheol Park and Kwang Joon Yoon
Abstract
Piezoelectric self-sensing of adsorption-induced microcantilever bending
Pages 457-461
J.D. Adams, B. Rogers, L. Manning, Z. Hu, T. Thundat, H. Cavazos and S.C. Minne
Abstract
 
 Actuators Section
Electronic and software control for rotary piezomotor
Pages 462-471
Martin France, Dominique Dubet, Sébastien Kuzmic and Lionel Petit
Abstract
Curled micro-cantilevers using benzocyclobutene polymer and Mo for wafer level probing
Pages 472-479
Si-Hyung Lee and Bruce C. Kim
Abstract
A torsional MEMS varactor with wide dynamic range and low actuation voltage
Pages 480-487
C. Venkatesh, Shashidhar Pati, Navakanta Bhat and Rudra Pratap
Abstract
Optimization of an impact drive mechanism based on real-coded genetic algorithm
Pages 488-493
Jih-Lian Ha, Rong-Fong Fung and Chang-Fu Han
Abstract
Optimal design of the stator of a three-DOF ultrasonic motor
Pages 494-499
Chunsheng Zhao, Zhirong Li and Weiqing Huang
Abstract
An energy-based electroelastic beam model for MEMS applications
Pages 500-507
N.E. Ligterink, M. Patrascu, P.C. Breedveld and S. Stramigioli
Abstract
Final characterizations of MEMS-based pyrotechnical microthrusters
Pages 508-514
Carole Rossi, Benoît Larangot, Denis Lagrange and Amar Chaalane
Abstract
Piezoelectric ultrasonic motor by co-extrusion process
Pages 515-519
Chang-Bun Yoon, Gun-Tae Park, Hyoun-Ee Kim and Jungho Ryu
Abstract
Optimal design of piezoelectric transformer for high efficiency and high power density
Pages 520-526
Jung-Moo Seo, Hyun-Woo Joo and Hyun-Kyo Jung
Abstract
Design of optical pickup actuator suspension plates by the topology optimization method with the additional consideration of the plate orientation
Pages 527-534
Jae Eun Kim, Woochul Kim and Yoon Young Kim
Abstract
An inner product-based dynamic neural network hysteresis model for piezoceramic actuators
Pages 535-542
Xuanju Dang and Yonghong Tan
Abstract
Multi-target sputter deposition of Ni50Ti50 − xHfx shape memory thin films for high temperature microactuator application
Pages 543-548
S. Sanjabi, Y.Z. Cao and Z.H. Barber
Abstract
 
 Micromechanics Section
Quantitative thermal performance evaluation of a cost-effective vapor chamber heat sink containing a metal-etched microwick structure for advanced microprocessor cooling
Pages 549-556
Jeung Sang Go
Abstract
An electrostatic actuator for fatigue testing of low-stress LPCVD silicon nitride thin films
Pages 557-565
Wen-Hsien Chuang, Rainer K. Fettig and Reza Ghodssi
Abstract
A microfabricated electromagnetic linear synchronous motor
Pages 566-575
M.V. Shutov, E.E. Sandoz, D.L. Howard, T.C. Hsia, R.L. Smith and S.D. Collins
Abstract
 
 Technology Section
Fabrication of pyroelectric laser-energy meters and their characterization using Nd:YAG laser of variable pulse-width
Pages 576-583
S. Satapathy and V.K. Wadhawan
Abstract

 

 

 

 

 

Back to Journal Page

 


1999 - 2005 Copyright (C), International Frequency Sensor Association (IFSA). © All Rights Reserved.