|
Design
consideration and fabrication of a microchannel system containing a set
of heaters and an array of temperature sensors
Pages 177-183
Chien-Wei Liu, Chie Gau, Chin-Gi Liu and Chin-Sheng Yang
Abstract |
|
Deposition
of zinc oxide thin films for application in bulk acoustic wave resonator
Pages 184-188
G. Ferblantier, F. Mailly, R. Al Asmar, A. Foucaran and F. Pascal-Delannoy
Abstract |
|
Integrating
micromachined fast response temperature sensor array in a glass
microchannel
Pages 189-195
Zhenlan Xue and Huihe Qiu
Abstract |
|
In
situ thermal diagnostics of the micro-PCR system using liquid crystals
Pages 196-202
Jermim Noh, Su Whan Sung, Min Ku Jeon, Soo Ho Kim, Luke P. Lee and Seong
Ihl Woo
Abstract |
|
Wireless
passive SAW sensors using single-electrode-type IDT structures as
programmable reflectors
Pages 203-208
Qiuyun Fu, Helmut Stab and Wolf-Joachim Fischer
Abstract |
|
A
matrix formulation to introduce the concept of effective thermoelectric
tensors in idealized superlattices
Pages 209-214
B. Bêche, E. Bêche, L. Camberlein, F. Polet and E. Gaviot
Abstract |
|
Strain
measurement in a Mach–Zehnder fiber interferometer using genetic
algorithm
Pages 215-221
S.K. Ghorai, Dilip Kumar and Baljeet K Hura
Abstract |
|
Web-based
real-time temperature monitoring of shellfish catches using a wireless
sensor network
Pages 222-230
Karl Crowley, June Frisby, Séamus Murphy, Mark Roantree and Dermot
Diamond
Abstract |
|
Fabrication
and characterization of innovative gas flow sensor
Pages 231-234
Atul Kulkarni, Sunil Patil, R.N. Karekar and R.C. Aiyer
Abstract |
|
Impedance-based
response of an electrolytic gas bubble to pressure in microfluidic
channels
Pages 235-241
Daniel A. Ateya, Ashish A. Shah and Susan Z. Hua
Abstract |
|
Investigation
of TiO2 thick film capacitors for use as strain gauge sensors
Pages 242-249
A. Arshak, K. Arshak, D. Morris, O. Korostynska and E. Jafer
Abstract |
|
| Materials
and Technology Section |
|
Optimized
conditions for fabrication of La-dopant in PZT ceramics
Pages 250-256
L. Pdungsap, N. Udomkan, S. Boonyuen and P. Winotai
Abstract |
|
Piezoelectric
properties of Fe2O3-doped (1 − x)BiScO3–xPbTiO3
ceramics
Pages 257-263
Pongtip Winotai, Nitinai Udomkan and Siwaporn Meejoo
Abstract |
|
Analysis
of water and proton fluxes in ion-exchange polymer–metal composite (IPMC)
actuators subjected to large external potentials
Pages 264-272
Eniko T. Enikov and Geon S. Seo
Abstract |
|
Silicone
dielectric elastomer actuators: Finite-elasticity model of actuation
Pages 273-283
Guggi Kofod and Peter Sommer-Larsen
Abstract |
|
Low-frequency
ultrasonic piezoceramic sandwich transducer
Pages 284-289
Martine Wevers, Jean-Pierre Lafaut, Luc Baert and Irinela Chilibon
Abstract |
|
Modeling
of a Gc-sensing element for the interfacial
toughness of metal thin films on substrates
Pages 291-300
Insu Jeon, Masaki Omiya, Kikuo Kishimoto, Tadashi Asahina and Seyoung Im
Abstract |
|
Piezoactuator-integrated
monolithic microstage with six degrees of freedom
Pages 301-306
De-Yuan Zhang, Takahito Ono and Masayoshi Esashi
Abstract |
|
Electrically
coupled MEMS bandpass filters: Part I: With coupling element
Pages 307-316
Siavash Pourkamali and Farrokh Ayazi
Abstract |
|
Electrically
coupled MEMS bandpass filters: Part II. Without coupling element
Pages 317-325
Siavash Pourkamali and Farrokh Ayazi
Abstract |
|
| Systems/Applications
Section |
|
Sensing
of liquid level at micron resolution using self-excited millimeter-sized
PZT-cantilever
Pages 326-334
Gossett A. Campbell and Raj Mutharasan
Abstract |
|
Automatic
view planning with self-termination in 3D object reconstructions
Pages 335-344
Y.F. Li, B. He and Paul Bao
Abstract |
|
Self-diagnostic
high-density silicon microprobe arrays fabricated by the corner
compensated anisotropic etching of (1 1 0) silicon wafers
Pages 345-351
Changyeol Lee, Young-Ho Cho and Kwyro Lee
Abstract |
|
|