Analysis and experiment of a novel actuating design with a shear mode PZT actuator for microfluidic application Pages 1-9 S.C. Chen, C.H. Cheng and Y.C. Lin |
Post-processing techniques for locally self-assembled silicon nanowires Pages 10-15 Ongi Englander, Dane Christensen, Jongbaeg Kim and Liwei Lin |
MEMS based force sensors for the study of indentation response of single living cells Pages 16-22 Shengyuan Yang and M. Taher A. Saif |
Thick PZT layers deposited by gas flow sputtering Pages 23-27 H. Jacobsen, H.-J. Quenzer, B. Wagner, K. Ortner and Th. Jung |
Centrifugo-magnetic pump for gas-to-liquid sampling Pages 28-33 Stefan Haeberle, Norbert Schmitt, Roland Zengerle and Jens Ducrée |
A high-performance silicon-on-insulator MEMS gyroscope operating at atmospheric pressure Pages 34-42 Said Emre Alper, Kivanc Azgin and Tayfun Akin |
An orthogonal fluxgate-type magnetic microsensor with electroplated Permalloy core Pages 43-49 O. Zorlu, P. Kejik and R.S. Popovic |
Seedlayer-less gold electroplating on silicon surface for MEMS applications Pages 50-57 Takayuki Fujita, Suguru Nakamichi, Sunao Ioku, Kazusuke Maenaka and Yoichiro Takayama |
Micromachined methanol steam reforming system as a hydrogen supplier for portable proton exchange membrane fuel cells Pages 58-66 Dae-Eun Park, Taegyu Kim, Sejin Kwon, Choong-Ki Kim and Euisik Yoon |
Thermo-piezoelectric Si3N4 cantilever array on CMOS circuit for high density probe-based data storage Pages 67-72 Young-Sik Kim, Seongsoo Jang, Caroline Sunyong Lee, Won-Hyeog Jin, II-Joo Cho, Man-Hyo Ha, Hyo-Jin Nam, Jong-Uk Bu, Sun-II Chang and Euisik Yoon |
Electrical assisted patterning of cardiac myocytes with controlled macroscopic anisotropy using a microfluidic dielectrophoresis chip Pages 73-79 Mo Yang and Xin Zhang |
Double-sided scanning micromirror array for autostereoscopic display Pages 80-85 A. Nakai, K. Hoshino, K. Matsumoto and I. Shimoyama |
High-speed metal-based optical microscanners using stainless-steel substrate and piezoelectric thick films prepared by aerosol deposition method Pages 86-91 Jae-Hyuk Park, Jun Akedo and Harumichi Sato |
A ferromagnetic shape memory actuator designed for large 2D optical scanning Pages 92-98 M. Kohl, D. Brugger, M. Ohtsuka and B. Krevet |
Three-dimensional sheath flow sorting microsystem using thermosensitive hydrogel Pages 99-105 Takahiro Arakawa, Yoshitaka Shirasaki, Tokihiko Aoki, Takashi Funatsu and Shuichi Shoji |
|
|
Regular Papers: General Section |
Thermal hysteresis and voltage shift analysis for differential pressure sensors Pages 107-112 J. Albert Chiou and Steven Chen |
Low temperature sensing capability of polyaniline and Mn3O4 composite as NTC material Pages 113-118 Kowsar Majid, Sajeela Awasthi and M.L. Singla |
CMOS image sensor employing 3.3 V 12 bit 6.3 MS/s pipelined ADC Pages 119-125 Shy Hamami, Leonid Fleshel and Orly Yadid-Pecht |
Flexible eddy current sensor array for proximity sensing Pages 126-130 Xianglin Chen and Tianhuai Ding |
Non-linear dynamic modeling of hot-film/wire MAF sensors with two-stage identification based on Hammerstein model
Pages 131-140 Ke-Jun Xu, Hao Ren, Xiao-Fen Wang and Qin Teng |
Remote magnetostrictive position sensors interrogated by fiber Bragg gratings Pages 141-145 H.R. Carvalho, A.C. Bruno, A.M. Braga, L.C.G. Valente, A.L.C. Triques and M.C. Caspary |
120 × 90 element thermoelectric infrared focal plane array with precisely patterned Au-black absorber Pages 146-151 M. Hirota, Y. Nakajima, M. Saito and M. Uchiyama |
Twin multiplexing strain sensing array based on a low-coherence fiber optic Mach–Zehnder interferometer Pages 152-155 Libo Yuan, Qingbo Wen, Chongjie Liu, Yuxin Jie and Guangxin Li |
Fibre length-dependent fluorescence spectral characteristics in high erbium concentration fibres for the optimization of FBG-based fibre sensor systems Pages 156-161 Samer K. Abi Kaed Beyh, Tong Sun and Kenneth T.V. Grattan |
A non-contact proximity sensor with low frequency electromagnetic field Pages 162-168 Zhang Benniu, Zhang Junqian, Zhang Kaihong and Zhou Zhixiang |
Calibration and interface of a polaroid ultrasonic sensor for mobile robots Pages 169-178 Sv. Noykov and Ch. Roumenin |
SU-8 waveguiding interferometric micro-sensor for gage pressure measurement Pages 179-184 N. Pelletier, B. Bêche, N. Tahani, J. Zyss, L. Camberlein and E. Gaviot |
Complete calibration of a structure-uniform stereovision sensor with free-position planar pattern Pages 185-191 T. Xue, B. Wu, J.G. Zhu and S.H. Ye |
Membrane-suspended microgrid as a gas preconcentrator for chromatographic applications Pages 192-196 A.M. Ruiz, I. Gràcia, N. Sabaté, P. Ivanov, A. Sánchez, M. Duch, M. Gerbolés, A. Moreno and C. Cané |
Magnetically induced oscillations on a conductive cantilever for resonant microsensors Pages 197-202 C. De Angelis, V. Ferrari, D. Marioli, E. Sardini, M. Serpelloni and A. Taroni |
Determining 2D positions of sensor network nodes for temperature distribution measurement Pages 203-208 Shinji Ohyama, Ali Husein Alasiry, Junya Takayama and Akira Kobayashi |
Humidity detection by nanostructured ZnO: A wireless quartz crystal microbalance investigation
Pages 209-214 Xiaofeng Zhou, Jian Zhang, Tao Jiang, Xiaohua Wang and Ziqiang Zhu |
|
| Materials and Technology Section |
Piezoelectric characteristics of low temperature sintering Pb(Mn1/3Nb2/3)O3–Pb(Ni1/3Nb2/3)O3–Pb(Zr0.50Ti0.50)O3 according to the addition of CuO and Fe2O3 Pages 215-219 Yeongho Jeong, Juhyun Yoo, Sangho Lee and Jaeil Hong |
Multi-fields responsive ionic polymer–metal composite Pages 220-228 Il-Seok Park and Kwang J. Kim |
Biomimetic, low power pumps based on soft actuators Pages 229-235 Sonia Ramírez-García and Dermot Diamond |
Polymer magnetic scanners for bar code applications Pages 236-243 Arda D. Yalcinkaya, Olgaç Ergeneman and Hakan Urey |
A new concept of a linear smart actuator Pages 244-249 Awad Khidir Elwaleed, Nik Abdullah Mohamed, Mohd Jailani Mohd Nor and Mohd Marzuki Mustafa |
Design of a precision compliant parallel positioner driven by dual piezoelectric actuators Pages 250-256 W. Dong, L.N. Sun and Z.J. Du |
Bonding quartz wafers by the atom transfer radical polymerization of the glycidyl methacrylate at mild temperature Pages 257-261 Jianying Zhao, Zhenping Shang and Lianxun Gao |
Alternative dielectric films for rf MEMS capacitive switches deposited using atomic layer deposited Al2O3/ZnO alloys Pages 262-272 Cari F. Herrmann, Frank W. DelRio, David C. Miller, Steven M. George, Victor M. Bright, Jack L. Ebel, Richard E. Strawser, Rebecca Cortez and Kevin D. Leedy |
A study of the performance of microfabricated electroosmotic pump Pages 273-282 J.S. Hu and Christopher Y.H. Chao |
|
| Systems Applications Section |
Design and implementation of a capacitive fingerprint sensor circuit in CMOS technology Pages 283-291 Jin-Moon Nam, Seung-Min Jung and Moon-Key Lee |
Multi-layer SU-8 based micro dispensing system for microarray immunoassay Pages 292-299 Baojian Xu, Qinghui Jin and Jianlong Zhao |
Selective metallization of cured SU-8 microstructures using electroless plating method Pages 300-307 Wen Dai and Wanjun Wang |
Corrigendum to
“Design of a six-axis wrist force/moment sensor using FEM and its fabrication for an intelligent robot” [Sens. Actuators A 133 (1) (2007) 27–34] Page 308 Gab-Soon Kim |
|
|