Bullet Journal: SENSORS AND ACTUATORS A: PHYSICAL

     ISSN: 0924-4247  Vol.164/1-2

 

 

Date: November-December 2010

 

Physical Section

1.

Defect characterisation based on pulsed eddy current imaging technique
Pages 1-7
Yunze He, Feilu Luo, Mengchun Pan

2.

A highly sensitive humidity sensor based on DC reactive magnetron sputtered zinc oxide thin film
Pages 8-14
Padmanathan Karthick Kannan, Ramiah Saraswathi, John Bosco Balaguru Rayappan

3.

Planar coil-based differential electromagnetic sensor with null-offset
Pages 15-21
R.R. Robaina, Héctor Trujillo Alvarado, J.A. Plaza

4.

Vibration characteristics of micromachined piezoelectric diaphragms with a standing beam subjected to airflow
Pages 22-27
X.M. Jing, J.M. Miao, T. Xu, M. Olfatnia, L. Norford

5.

New dry electrodes based on iridium oxide (IrO) for non-invasive biopotential recordings and stimulation
Pages 28-34
N.S. Dias, J.P. Carmo, A. Ferreira da Silva, P.M. Mendes, J.H. Correia

6.

Quasi-monolithic heat flux microsensor based on porous silicon boxes
Pages 35-40
Katir Ziouche, Pascale Godts, Zahia Bougrioua, Charles Sion, Tuami Lasri, Didier Leclercq

7.

Off-diagonal GMI sensor with stress-annealed amorphous ribbon
Pages 41-45
Michal Malátek, Luděk Kraus

 

Materials & Technology Section

8.

Quantum tunnelling composites: Characterisation and modelling to promote their applications as sensors
Pages 46-57
Andrés Díaz Lantada, Pilar Lafont, José Luis Muñoz Sanz, Juan Manuel Munoz-Guijosa, Javier Echavarri Otero

9.

Thermo-mechanical properties of alumina films created using the atomic layer deposition technique
Pages 58-67
David C. Miller, Ross R. Foster, Shih-Hui Jen, Jacob A. Bertrand, Shawn J. Cunningham, Arthur S. Morris, Yung-Cheng Lee, Steven M. George, Martin L. Dunn

 

Actuator Section

10.

Fabrication and testing of cellulose EAPap actuators for haptic application
Pages 68-73
Gyu-Young Yun, Jaehwan Kim, Joo-Hyung Kim, Sang-Youn Kim

11.

A new two stage miniature pump: Design, experimental characterization and numerical analyses
Pages 74-87
A. Rossetti, G. Pavesi, G. Ardizzon

12.

Multiplex pneumatic control method for multi-drive system
Pages 88-94
Yasutaka Nishioka, Koichi Suzumori, Takefumi Kanda, Shuichi Wakimoto

13.

Shrinking design of a MEMS optical scanner having four torsion beams and arms
Pages 95-106
Takayuki Iseki, Mikio Okumura, Takashi Sugawara

14.

Analysis of the temperature field distribution for piezoelectric plate-type ultrasonic motor
Pages 107-115
Li Shiyang, Yang Ming

15.

McKibben artificial muscle using shape-memory polymer
Pages 116-124
Kazuto Takashima, Jonathan Rossiter, Toshiharu Mukai

16.

Design and fabrication of a new two-dimensional pneumatic micro-conveyor
Pages 125-130
Rabah Zeggari, Reda Yahiaoui, Julien Malapert, Jean-François Manceau

17.

Piezoelectric actuation of direct-write electrospun fibers
Pages 131-136
Juan Pu, Xiaojun Yan, Yadong Jiang, Chieh Chang, Liwei Lin

18.

Gain scheduled control of IPMC actuators with ‘model-free’ iterative feedback tuning
Pages 137-147
A.J. McDaid, K.C. Aw, S.Q. Xie, E. Haemmerle

19.

Nickel-plated thermal switch with electrostatic latch
Pages 148-153
M. Driesen, F. Ceyssens, J. Decoster, R. Puers

 

Technology Section

20.

Absolute etch rates in alkaline etching of silicon (1 1 1)
Pages 154-160
I.A. Shah, W.J.P. van Enckevort, E. Vlieg

21.

Fabrication of micro-lens array using quartz wet etching and polymer
Pages 161-167
Haekwan Oh, Geunyoung Kim, Hyunwoo Seo, Yotak Song, Keekeun Lee, Sang Sik Yang

Sensors

 

 

 

 

 

 

 

 

Sensors & Transducers journal

 

 

MEMS Energy Harvesting Devices

 

 

 

 

Back to Journal Page

 


1999 - 2010 Copyright (C), International Frequency Sensor Association (IFSA). © All Rights Reserved.