List of DAQ Systems Manufacturers:

Sponsored Links:

SWP, Inc.

UFDC-1 - 2-channel high performance one chip data acquisition system for frequency-time parameters of signals (sensor outputs): frequency, period, duty-cycle, duty-off factor, PWM, time interval, pulse width and space, frequency (period) ratio and difference, phase-shift, events counting, rotation speed; 0.05 Hz - 7.5 MHz (120 MHz); programmable accuracy 1...0.001 %; I²C, SPI, RS-232 interfaces

UFDC-1M-16 - 2-channel fast high performance one chip data acquisition system for frequency-time parameters of signals (sensor outputs): frequency, period, duty-cycle, duty-off factor, PWM, time interval, pulse width and space, frequency (period) ratio and difference, phase-shift, events counting, rotation speed; 1 Hz - 7.5 MHz (120 MHz); programmable accuracy 1...0.001 % and non-redundant conversion time from 6.25 ms to 6.25 ms; I²C, SPI, RS-232 interfaces

EVAL-UFDC-1/UFDC-1M-16 -

Frequency output sensors:

AS8500 - a complete, low power multi purpose data acquisition system for very small signals (i.e. voltages from shunt resistors, thermocouples), 16-bit resolution, 3-wire serial interface

AS8501 - High Performance Data Acquisition System, 16-bit resolution, 3-wire serial interface

JLM Innovation

FQ4 - 4 channel measurement instrument for QMB and SAW sensors. Frequency input up to 500 MHz with simultaneous, continuous measurement of all channels

ME-1400 and MEphisto Digi - Counter & digital I/O board for PCI, PXI/CompactPCI, USB. Up to 3, 6, 15 or 30 counters. 16 bit counters compatible with 8254.1 or 10 MHz selectable clock; quartz oscillator accuracy 0.01 % (100 ppm)

ME-8100 - opto-isolated digital and counter board. 3x 16 bit counters, external counter clock up to 1 MHz

ME-Jekyll ME-4610 - High-precision, low-price 16 bit standard DAQ board. 3x16 bit counters

ME-FoXX ME-46xx - High-precision 16 bit multifunctional DAQ board. 3x16 bit counters

DRP 8500 - Series Low Cost Analog to Frequency Modules for Micro PLC Digital Inputs. (Current-, voltage-, thermocouple-, RTD- and strain gage-to-frequency converters); 0 - 5100 Hz frequency ranges

D1000 and D2000 - digital transmitters with frequency, time and event inputs

iDRX - programmable signal conditioners/transmitters with frequency input (0-50 kHz; 0.1 % FS)

iFPX - Internet Counter iServer MicroServer (1 Hz - 100 kHz; 0.3 % totalizer accuracy)

INET Series - instruNet Series Direct Sensor to Data Acquisition with 10 Counter/Timer channels

OMB-DAQBOARD-2000 Series - modules with counter/timers

XXXF70 - Analog-to-Frequency Converter. Converts an input current, an input voltage or the signal from a sensor (thermocouple, Pt-100, resister, measurement bridge, etc.) into a frequency, which is proportional to the magnitude of the input signal. Maximum output frequency  20 kHz. Accuracy 0.02 %

0-20 mA, 4-20 mA, voltage 0-5, 1-5, 0-10 or 2-10 V dc; frequency output from 0.5 pph to 10 kHz

CNL48/F - programmable digital converter; all process and temperature inputs (V, mV, mA, power supply sensor, potentiometer, thermocouple,PT100, ...), frequency output

8505, 8506, 8507 - Analog to frequency converters. The 4 to 20 mA input Model 8505 provides 1 kHz to 5 kHz output frequency for a 4 μA per Hertz resolution. The Model 8506 voltage input is scaled for 1 mV per Hertz to 5 kHz for 5 volts. The Model 8507 voltage input is scaled for 2 mV per Hertz to 5 KHz for 10 volts input. The output for all modules is linear to 0.01% with accuracy of better than 0.1%

8555 - analog to frequency converter for strain gages based load cell or pressure transducer outputs. The accuracy of better than 0.1%

MAXQ7665 - smart systems-on-a-chip (SoC) are data-acquisition systems based on a microcontroller (µC). Provides the most integrated system solution for processing magnetic sensor output signals in automotive and industrial applications

MAXQ7666 is a smart data-acquisition system based on the low-power, MAXQ20 RISC microcontroller

MCP3905A - active power to pulse converter (Energy Measurement IC), 0.1 %, 500:1 dynamic range

MCP3906A - active power to pulse converter (Energy Measurement IC), 0.1 %, 1000:1 dynamic range

MCP3909 - active power to pulse converter with SPI interface with simultaneous active power pulse output

MEGATRON

MIFN - Converts analog signals: current/voltage DC , temperature (PT-100 sensor) to 6 Hz - 1 KHz pulses. Accuracy 0.5 % F.S.

MATP - Converts analog signals: 4-20mA / 0-60mV DC etc.to pulses 0.01 Hz up to 1 KHz

MADO - Converts analog signals: 4-20mA DC / 0-60mV DC etc../ 0-5A AC to pulses 0.01 Hz up to 10 KHz

ADwin

ADwin-light-16 - real-time system; optional configuration: 2x32-bit counter, event, period, duty-cycle, PWM

ADwin-Gold - real-time system; optional configuration: 2x32-bit counter, event, period, duty-cycle, PWM

ADwin-Pro - contains 32 -bit counter, period, PWM analysis, pulse width, duty-cycle measurement