Bullet Sensors & Transducers e-Digest, Vol. 63, Issue 1, January 2006: Product News

    (ISSN 1726- 5479)


Submit an Article or Press Release

PCB logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents



Acoustic Calibration Coupler Allows for up to 8 Simultaneous Microphone Calibrations


January 10, 2006, Depew, NY, USA - The Vibration Division of PCB Piezotronics, Inc. (PCB) introduces new Model 079A31 8-channel calibration coupler to its acoustic test products line. Model 079A31 is designed for simultaneous calibration of up to 8 1/4" microphones, reducing set-up time for large channel microphone calibrations. The unit is designed to be used with a PCB CAL250 Handheld Calibrator (94 dB at 250 Hz), and comes standard with 18" tubes, with modification options for variant length requirements.


PCB carries a full compliment of externally polarized and modern prepolarized condenser microphone designs, as part of its Acoustic Test product line ...


For additional information, contact the Vibration Division of PCB Piezotronics, Inc. toll-free at 888-684-0013 (in the U.S. and Canada); E-mail: vibration@pcb.com; or fax at 716-685-3886. For other PCB products, contact PCB directly at 716-684-0001, or visit our web site at www.pcb.com.




Mark Valentino, 

Product Manager,

PCB Vibration Division,

3425 Walden Avenue, Depew, NY 14043-2495, USA

E-mail: mvalentino@pcb.com



General / Sales Leads:

Andrea Mohn, Marketing Coordinator

PCB Piezotronics, Inc.

3425 Walden Avenue, Depew, NY 14043-2495 USA

Tel.: (716) 684-0002 ext. 2216, fax: (716) 684-0987

E-mail: mktg@pcb.com

Acoustic Calibration Coupler





Back to S&T e-Digest page


1999 - 2006 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.