Bullet Sensors & Transducers e-Digest, Vol. 47, Issue 9,  September 2004: Product News

    (ISSN 1726- 5479)

 

Submit an Article or Press Release

Electro Standards Laboratories logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents


 

Intelligent Digital Signal Conditioner

 

 

The Electro Standards Laboratories’ Model 4325 Intelligent Digital Signal Conditioner connects directly to a standard strain gage transducer such as a load cell or extensometer, and generates a +/-10V analog output along with a serial digital output suitable for connection to a computer. The Model 4325 can compensate for transducer non-linearities using its integrated six-point calibration capability not found in standard signal conditioners. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements. Its multidrop RS-232 serial port and simple command set allow for connection of multiple units in a serial network configuration. Features include nonvolatile memory for parameter and calibration storage, ability to select between two transducers, multi-point and mV/V calibration, remote sense excitation, and 24-bit internal resolution with 16-bit analog output. Field programmable for software updates.

 

 

Features:

  • 2-pt, mV/V Calibration

  • 6-pt Linearization Calibration

  • Scalable Ѓ}10V Analog Output

  • 16-Bit Analog Output

  • Direct to PC with RS232 Data

  • 24-Bit Resolution

  • Multiple Filter Selections

  • Storage for Two Calibrated Transducers

  • Selectable Sample Rate

  • Remote Sense Excitation

  • Addressable for Serial Network

  • Tare, Peak, Valley

  • Unit Support: Lb, Kg, In, Cm

Model 4325 Intelligent Digital Signal Conditioner

 

Specifications:

 

Excitation
   Voltage: 5 VDC
   Nom. Load: 350 
Operation
   Internal Resolution: 24-bit
   Input Range: +5.5 mV/V (Avail. to+200mV/V)
   Conversion Rate: 30/60/120 per second
   Error: 0.01%, +1 count
Outputs
   Analog: 16-bit, scalable, +10V
   Serial Data: multi-drop RS232
Power
   5 VDC, 150 mA
   (included adapter) 110/240VAC, 60/50 Hz

Mechanical
   Size: 5.5” X 2.75” X1.2”
   Weight: 8.3 oz. (235 g)

Contact:

36 Western Industrial Drive,

Cranston, RI 02921

Tel: 401-943-1164 

Fax:401-946-5790 

E-mail:eslab@ElectroStandards.com

 

 

Back to S&T e-Digest page

 


1999 - 2004 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.