Bullet Journal: Measurement

     ISSN 0263-2241 Vol./Iss.: 42, 10

 

 

IMEKO TC8 - Traceability to support CIPM MRA and other international arrangements
Edited by Carlo Ferrero

 

Date: December 2009

 

  1.  
IMEKO TC8 Workshop on traceability
Pages 1427-1428
Carlo Ferrero
  2.  
Deducing calibration and measurement capabilities from key comparisons
Pages 1429-1432
Horst Bettin
  3.  
Traceability for ballistics signature measurements in forensic science
Pages 1433-1438
John Song, Theodore Vorburger, Susan Ballou, Li Ma, Thomas Renegar, Alan Zheng, Martin Ols
  4.  
Traceability of electrical quantities obtained by sampling
Pages 1439-1442
Umberto Pogliano
  5.  
Torque traceability examination of calibration laboratories in Korea
Pages 1443-1447
Yon-Kyu Park, Min-Seok Kim, Jeong-Tae Lee, Ho-Young Lee, Dae-Im Kang
  6.  
Traceability of torque transducers under rotating and dynamic operating conditions
Pages 1448-1453
Georg Wegener, Thomas Bruns
  7.  
Realization and dissemination of units in a revised SI
Pages 1454-1458
Franco Cabiati, Walter Bich
  8.  
About the treatment of systematic effects in metrology
Pages 1459-1462
Franco Pavese
  9.  
Traceability needs for geometrical identification of form of biobearings working surfaces and defect of joint cartilage
Pages 1463-1468
Andrzej Ryniewicz
  10.  
Overall assessment of participants’ performance in multi-measurand comparisons
Pages 1469-1472
Paola Pedone, Alessandro Balsamo
  11.  
Comparison of measurements in co-ordinate metrology
Pages 1473-1477
Alistair B Forbes, Ben Hughes, Wenjuan Sun
  12.  
Issues in significance testing
Pages 1478-1481
Giampaolo E. D’Errico
  13.  
Weather measurements traceability: An example at INRiM
Pages 1482-1486
Alice Meda, Andrea Merlone, Francesca Romana Pennecchi, Marina Sardi
  14.  
Improvement of primary power standard through international comparison feedback
Pages 1487-1490
Luciano Brunetti, Luca Oberto, Marco Sellone
  15.  
Feasibility study for the development of a toner-Reference Material
Pages 1491-1496
G. Zappa, P. Carconi, R. Gatti, A. D’Alessio, R. Di Bonito, L. Mosiello, C. Zoani
  16.  
Uncertainty of measurement by Monte-Carlo simulation and metrological reliability in the evaluation of electric variables of PEMFC and SOFC fuel cells
Pages 1497-1501
Sergio P. Oliveira, Adriana C. Rocha, Jorge T. Filho, Paulo R.G. Couto
  17.  
Proficiency testing programs to improve traceability in chemical analysis
Pages 1502-1509
Carlo Ferrero, Marco Casaril
  18.  
Traceability and uncertainty analysis in volume measurements
Pages 1510-1515
S. Lorefice
  19.  
Traceability enhancement in angle measurements
Pages 1516-1521
Vytautas Giniotis, Mindaugas Rybokas
  20.  
Probabilistic measurement evaluation for the implementation of the Measuring Instrument Directive
Pages 1522-1531
Francesco Crenna, Giovanni B. Rossi, Luca Bovio
  21.  
Report of the Italian inter-laboratories comparison of high dc resistance on the calibration of a 10 MW and a 1GW resistors
Pages 1532-1540
F. Galliana, P.P. Capra, E. Gasparotto
  22.  
The equivalence in accreditation: Robust or standard statistical analysis of interlaboratory comparisons
Pages 1541-1545
C. Ferrero
  23.  
Validation of a novel technique for the measurement of the refractive index of a prism by means of interlaboratory comparison
Pages 1546-1549
M. Astrua, M. Pisani

Sensors

 

 

 

 

 

Sensors & Transducers journal

 

 

 

 

Back to Journal Page

 

1999 - 2009 Copyright (C), International Frequency Sensor Association (IFSA). © All Rights Reserved.