Analysis of surface acoustic wave pressure sensors
Pages 1-5
Q. Jiang, X.M. Yang, H.G. Zhou and J.S. Yang
Abstract
|
Detection of acoustic emission in structure using Sagnac-like fiber-loop interferometer
Pages 6-13
Libo Yuan, Li-min Zhou and Wei Jin
Abstract
|
Tubomachinery blade vibration amplitude measurement through tip timing with capacitance tip clearance probes
Pages 14-24
Craig P. Lawson and Paul C. Ivey
Abstract
|
MEMS shear stress sensors for microcirculation
Pages 25-32
Gopikrishnan Soundararajan, Mahsa Rouhanizadeh, Hongyu Yu, Lucas DeMaio, E.S. Kim and Tzung K. Hsiai
Abstract
|
First-order piezoresistance coefficients in silicon crystals
Pages 33-43
S.I. Kozlovskiy and I.I. Boiko
Abstract
|
Evaluation of mechanical quality of field-assisted diffusion bonding by ultrasonic nondestructive method
Pages 44-48
Zongjie Cao, Huaidong Chen, Jin Xue and Yuwen Wang
Abstract
|
Micromachined infrared bolometers on flexible polyimide substrates
Pages 49-56
Shadi A. Dayeh, Donald P. Butler and Zeynep Çelik-Butler
Abstract
|
Reproducible coating and testing techniques for large core luminescent clad optical fibre probes for UV detection
Pages 57-62
Colin Fitzpatrick, Joseph Walsh, Padraig Quinn, Ian Grout and Elfed Lewis
Abstract
|
Modeling and design of composite free–free beam piezoelectric resonators
Pages 63-69
A.T. Ferguson, L. Li, V.T. Nagaraj, B. Balachandran, B. Piekarski and D.L. DeVoe
Abstract
|
Novel approaches to particle tolerant valves for use in drug delivery systems
Pages 70-77
T. Goettsche, J. Kohnle, M. Willmann, H. Ernst, S. Spieth, R. Tischler, S.
Messner, R. Zengerle and H. Sandmaier
Abstract
|
Integration and assessment of fibre Bragg grating sensors in an all-fibre reinforced polymer composite road bridge
Pages 78-85
Y.M. Gebremichael, W. Li, W.J.O. Boyle, B.T. Meggitt, K.T.V. Grattan, B. McKinley,
G.F. Fernando, G. Kister, D. Winter, L. Canning and S. Luke
Abstract
|
Design and performance of psychrometric soil water potential meter
Pages 86-91
Wojciech Skierucha
Abstract
|
Thermal cycle characteristics of PTCR ceramic thermistors
Pages 92-97
Zhi Cheng Li and Bill Bergman
Abstract
|
Water uptake and migration effects of electroactive ion-exchange polymer metal composite
(IPMC) actuator
Jun Ho Lee, Jong Hoon Lee, Jae-Do Nam, Hyoukryeol Choi, Kwangmok Jung, Jae Wook
Jeon, Young Kwan Lee, Kwang Jin Kim and Yongsug Tak
Abstract
|
A novel electrokinetic micromixer
Pages 107-115
Hsin-Yu Wu and Cheng-Hsien Liu
Abstract
|
An impedance approach for vibration response synthesis using multiple PZT actuators
C.C. Cheng and C.C. Lin
Abstract
|
Development of the 6-axis force/moment sensor for an intelligent robot's gripper
Pages 127-134
Joong-Jo Park and Gab-Soon Kim
Abstract
|
Low temperature characteristics of ionic polymer–metal composite actuators
Pages 135-143
Jason W. Paquette, Kwang J. Kim and Doyeon Kim
Abstract
|
Integrable silicon microfluidic valve with pneumatic actuation
Pages 144-151
Antonio Luque, José M. Quero, Cyrille Hibert, Philippe Flückiger and Alfonso M. Gañán-Calvo
Abstract
|
A collapsing bubble-induced micro-pump using the jetting effect
Pages 152-161
B.C. Khoo, E. Klaseboer and K.C. Hung
Abstract
|
Electromechanical and fluidic evaluation of the resonant microfan gas pump and aerosol collector
Pages 162-170
Ryan J. Linderman, Oyvind Nilsen and Victor M. Bright
Abstract
|
Coupled-field analysis of piezoelectric beam actuator using FEM
Pages 171-176
Der Ho Wu, Wen Tung Chien, Chih Jen Yang and Yu Tang Yen
Abstract
|
|
|
Journal : SENSORS AND ACTUATORS A: PHYSICAL