Smart Sensors and Systems Design (SSSD' 2012)
A Two-day Advanced Engineering Course
22-23 November 2012, Barcelona, Spain
General Information About the Course
This course is suitable for engineers who design various physical or chemical digital, smart and intelligent sensors, data acquisition, and measurement systems. It should be also useful for researchers, graduate and post graduate students. The prerequisite for the course is a basic knowledge of electrical circuits and systems. Course will be taught in English. Each attendee will receive an IFSA certificate of attendance at the course.
An advanced engineering course describes modern developments and trends in the field of digital, smart and intelligent sensors and sensor systems design. Its background is based on programmable parameter-to-frequency (time) converters and universal sensors and transducers interfaces as a digital sensors’ and systems’ cores as well as structural-algorithmic methods for data extraction in order to move from a traditional analog signal domain (voltage and current sensors outputs) to frequency-time signal domain (frequency, period, duty-cycle, pulse-modulated, time interval, phase-shift and pulse number outputs). Working in the frequency-time signal domain simplifies design, and obviates some technical and technological problems, due to the properties of frequency as informative parameter of sensors and transducers.
After a general overview of modern quasi-digital (with frequency, period, duty-cycle, pulse-width modulated (PWM), phase-shift, pulse number, etc., output) sensors and transducers, systems details are discussed including: sensors, FDC (frequency-to-digital conversion based on advanced methods for frequency-time domain parameters measurements with adaptive possibilities), communications buses, PC interfacing and software. A systematic approach towards the practical design of low-cost high-performance smart sensors systems with self-adaptation and self-identification possibilities is presented. The proposed design approach compatible with MEMS, system-on-chip (SoC) and system-in-package (SiP) implementation. It is based on the novel integrated circuits such as the Universal Frequency-to-Digital Converter (UFDC-1, UFDC-1M-16) and Universal Sensors and Transducers Interface (USTI) and can overcoming current hurdles to truly widespread deployment of digital, intelligent and smart sensors and sensor systems. Different examples of physical and chemical digital sensors and sensor systems will be given and discussed in details.
Objectives of the Course
Contents of the Course
The course will be held in the Baix Llobregat Campus of Technical University of Catalonia (UPC Barcelona),
Parc UPC-PMT, Edificio RDIT-K2M, C/Esteve Terradas, 1, 08860 Castelldefels, Spain
22.11.2012 14.00 : 18.00
23.11.2012 10.00 : 14.00
International Frequency Sensor Association (IFSA)
Technology Assistance BCNA 2010, S. L. (TAB)
Universitat Politècnica de Catalunya (UPC Barcelona)
Prof. Sergey Y. Yurish,
IFSA President, TAB R&D Director and co-founder
Tel.: + 34 93 413 79 41
Prof. Sergey Yurish has received his PhD degree in 1997 from National University Lviv Polytechnic, UA. He has published more than 160 scientific and technical peer-review papers and articles, five books (including “Data Acquisition and Signal Processing for Smart Sensors”; “Smart Sensors and MEMS”; and “Digital Sensors and Sensor Systems: Practical Design”), and holds 9 patents. Prof. Yurish is the IFSA President and Editor-in-Chief of Sensors & Transducers journal. He regularly serves on committees for conferences and other journals. Prof. Yurish has contributed to numerous advanced engineering courses in Austria, Germany, Italy, Spain and The Netherlands. In 2003 he was a co-director of NATO Advanced Study Institute (ASI) on Smart Sensors and MEMS in Portugal. In 2010 Prof. Sergey Y. Yurish has got a prestigious IARIA Fellow Award for continuous leadership roles and outstanding scientific research results.
Mr. Javier Cañete
Tel.: +34 93 680 282 682
Registration fee: EUR 485.00
Coffee breaks and lecture notes (printed and electronic versions) are included in the fee.
For your convenience, there are several payment methods available:
1) By a credit card through the PayPal (it is NOT necessary to have a PayPal account): email@example.com
2) By direct money transfer to our bank account (ask for details by e-mail: firstname.lastname@example.org)
Please register at:
Deadline for Registration: 21 November 2012
BCN Events Hotel, Castelldefels (****): http://www.hotel-bcneventscastelldefels.com/en/
Flora Park Hotel, Castelldefels (***): http://www.floraparc.com/
Canal Olimpic Hotel, Castelldefels (***): http://www.hotelcanalolimpic.com/es/barcelona/
IBIS Castelldefels (**): http://www.ibishotel.com/gb/hotel-3208-ibis-barcelona-castelldefels/index.shtml
All these hotels are situated at walking distance from the course’s venue and public transport (bus and train) to airport (bus L99) and Barcelona city centre (bus L95).
1999 - 2012 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.
Home - News - Links - Archives - Tools - Voltage-to-Frequency Converters - Standardization - Patents - Marketplace - Projects - Wish List - e-Shop - Sensor Jobs - Membership - Videos - Publishing - Site Map - Subscribe - Search
Members Area -Sensors Portal -Training Courses - S&T Digest - For advertisers - Bookstore - Forums - Polls - Submit Press Release - Submit White Paper - Testimonies - Twitter - Facebook - LinkedIn